281.58 CHF

292.72 EUR *
311.66 USD *

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM-XXXX

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled

326.63 CHF

339.56 EUR *
361.53 USD *

Inline Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWMIL-XXXX

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.

422.37 CHF

439.09 EUR *
467.50 USD *

Adapter for Original Omicron Pincer SA02-1862 (STM1)

Product code: ADOMO

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.

197.11 CHF

204.91 EUR *
218.17 USD *

Adapter for Original Omicron Pincer GA02-1810/GA02-1119

Product code: ADOMO2

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM

197.11 CHF

204.91 EUR *
218.17 USD *

Adapter for Original Omicron Straight Pincer GA02-182

Product code: ADOMS

Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182

332.26 CHF

345.41 EUR *
367.76 USD *

Flange Adapter for Wobblesticks - for installing wobblesticks to flanges with Tube ID<38mm

Product code: BP40

Allows for the mounting of a Wobblestick to DN40CF (2.75") flanges with an inner tube diameter that is too small to accept the bellows.

259.05 CHF

269.30 EUR *
286.73 USD *

Zero Length Reducing Flange CF63CF40 for Wobble Sticks

Product code: ZLCF63CF40WM

Zero Length Reducing Flange CF63/CF40 with bevelled inner edges. Customized for use with wobblesticks.

546.26 CHF

567.88 EUR *
604.62 USD *

Hex Key for Wobblestick

Product code: HEXKEY-XXXX

Allen key end effector for single shaft wobblestick.
Available in both, metric and imperial sizes. Please specify key type and size.

113.00 CHF

117.47 EUR *
125.07 USD *

Jaw Axles replacement kit for Pincer-grip

Product code: SERKPG

Replacement press pins for Ferrovac pincer-grip, including new washers. The revised design eliminates the risk of losing the circlips present in previous versions and is backwards compatible with most older pincers.

98.00 CHF

101.88 EUR *
108.47 USD *

47.37 CHF

49.24 EUR *
52.43 USD *

Lock Ring ID 11 for Linear/Rotary Feedthroughs & Wobblesticks

Product code: LRMD

Lock Ring ID 11 for Linear/Rotary Feedthrough & Wobblestick

293.00 CHF

304.60 EUR *
324.30 USD *

Bearings replacement kit for WM40 Wobbelsticks with a 7mm shaft

Product code: SERKWM40(S7)

Replacement kit for bearings of WM40-manipulators with a 7mm shaft.

701.14 CHF

728.89 EUR *
776.05 USD *

Factory overhaul of WMG40 Wobblestick

Product code: SERFWMG40

Complete factory overhaul of dual shaft wobblestick manipulator including

• disassembly and ultrasonic cleaning
• slide bearing replacement, air- and vacuumside
• functional inspection

293.00 CHF

304.60 EUR *
324.30 USD *

Bearings replacement kit for WM40 Wobbelsticks with a 5mm shaft

Product code: SERKWM40(S5)

Replacement kit for bearings of WM40-manipulators with a 5mm shaft.

658.89 CHF

684.97 EUR *
729.28 USD *

Deflection Aligner for Wobblesticks DN40CF

Product code: TSWMA

A useful accessory to align and keep the deflection angle of a wobblestick manipulator. Three thumbscrews are used to position the wobblestick axis.

Maximum deflection angle = +-8 degrees.
 

547.39 CHF

569.05 EUR *
605.87 USD *

Deflection Limiter (3deg) for Wobblesticks DN40CF

Product code: TSWMDL(3)

Deflection Limiter to restrict the angular deflection of wobblesticks to three degrees.

444.89 CHF

462.50 EUR *
492.42 USD *

Protection Rail for Wobblesticks DN40CF - Recommended for TSWMA and TSWMDL

Product code: TSWMF-XXXX

Protection rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use. This model is recommended in combination with TSWMA deflection aligners and TSWMDL deflection limiters
 

444.89 CHF

462.50 EUR *
492.42 USD *

Parking-/ Protection Rail for WM DN40CF vertical

Product code: TSWMV-XXXX

External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.

1'384.92 CHF

1'439.73 EUR *
1'532.88 USD *

Tube Support for Wobblestick with angular alignment of the Wobblestick axis

Product code: TSWMPA-XXXX

Tube Support for Wobblestick with angular alignment of the Wobblestick axis

388.58 CHF

403.96 EUR *
430.10 USD *

Lock Ring for Parking- and Protection Rail

Product code: TSWMLR

Lock ring for locking the external support rails TSWM with three or four knurled screws.

146.42 CHF

152.21 EUR *
162.06 USD *

Adapter WM40 with D=7mm shaft from M4 to M3 internal thread

Product code: ADWMS7(M3I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

185.84 CHF

193.20 EUR *
205.69 USD *

Adapter WM40 with D=7mm shaft from M4 to M6 internal thread

Product code: ADWMS7(M6I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

on request

428.00 CHF

444.94 EUR *
473.73 USD *

Zero Length Reducer DN100CF to DN40CF for Wobble Sticks

Product code: ZLCF100CF40WM

Zero Length Reducing Flange CF100/CF40 with bevelled inner edges. Customized for use with wobblesticks.