146.42 CHF

149.70 EUR *
160.92 USD *

Adapter WM40 with D=7mm shaft from M4 to M3 internal thread

Product code: ADWMS7(M3I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

List price:

185.84 CHF

190.01 EUR *
204.24 USD *

Adapter WM40 with D=7mm shaft from M4 to M6 internal thread

Product code: ADWMS7(M6I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

List price:

on request

PEEK Adapter for WM40, End Piece: D=7mm / L=16mm

Product code: ADWMS7(S70L16PEEK)

Adapter for electrical insulation of WM40 wobblesticks. Cylindrical end piece OD=7mm, L=16mm.
For WM40 with D=7mm shaft.

List price:

264.68 CHF

270.62 EUR *
290.89 USD *

CF - KF40 adapter, length 25mm

Product code: AFCF40KF40L25

List price:

844.74 CHF

863.69 EUR *
928.38 USD *

Blank Flange DN300CF, 30 Bolt holes for M10, OD 355.6mm

Product code: BFCF300-30

Blank Flange DN300CF, stainless steel 304L, non rotatable, through hole

Special discounted price:

337.89 CHF

345.47 EUR *
371.34 USD *

Blank Flange DN300CF, 30 Bolt holes for M10, OD 355.6mm

Product code: BFCF300-30 Special Offer

~50% discounted price!

Product code: BKHEVSN40RM110

Detachable heating module 110V for the NexGeneration UHV Suitcase with sample transporters.

List price:

872.89 CHF

892.47 EUR *
959.31 USD *

Heater module for UHV Suitcases with Sample Transporter, 220V

Product code: BKHEVSN40RM230

Detachable heating module 230V for the NexGeneration UHV Suitcase with sample transporters.

List price:

872.89 CHF

892.47 EUR *
959.31 USD *

Heater module for UHV Suitcases, 110VAC

Product code: BKHEVSN40SWM110

LSN controller to NexTorr™ connecting cable for NEG activation, 3m length.

List price:

on request

NEG Cable 3P5A 3m

Product code: CABSAESNEG3P5A

List price:

on request

NEG Cable 4P10A 3m

Product code: CABSAESNEG4P10A

List price:

on request

NEG Cable 6P10A 3m

Product code: CABSAESNEG6P10A

List price:

on request

NEG Cable 6P5A 3m

Product code: CABSAESNEG6P5A

List price:

on request

NIOPS03 - Output Cable ION - 3m

Product code: CABSAESNIOPS

Output cable ION element

List price:

3'776.54 CHF

3'861.26 EUR *
4'150.45 USD *

CF 6-Way Cube 100

Product code: CB100

6-way cube DN100CF. Flanges tapped M8

List price:

956.24 CHF

977.69 EUR *
1'050.92 USD *

CF 6-Way Cube 16

Product code: CB16

6-way cube DN16CF. Flanges tapped M4

List price:

Foam cap for CTD50

List price:

5'975.00 CHF

6'109.03 EUR *
6'566.58 USD *

UHV Booster CF40 dewar version with heating coil and temperature sensor

Product code: CTDH40

LN2 cold trap for fast pump down dock. A double walled, vacuum isolated dewar filled with liquid nitrogen is used to cool a heat exchanger with a large surface area.

List price:

5'051.53 CHF

5'164.85 EUR *
5'551.68 USD *

UHV Booster CF40 flow through version with heating coil and temperature sensor

Product code: CTH40(WT)

Liquid nitrogen cold trap on a DN40CF flange as flow through version with heating coil and temperature sensor.

A working pressure in the 1E-8mbar range can be reached within much less than 1 hour.

List price:

49.56 CHF

50.67 EUR *
54.47 USD *

Dry Lube Coated Ball Bearing 6.35x12.7x3.175mm

Product code: DBB-1/4-1/2-1/8

Dicronite ™ coated ball bearings are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.

4, 6 or 10 pins, 10A per pin, pin diameter 1.42mm or 1.57mm, air side connector included.

List price:

478.68 CHF

489.42 EUR *
526.07 USD *

Electrical Feedthrough D-Sub 15 Pin

Product code: EFCF40DSUB15

List price:

1'120.68 CHF

1'145.82 EUR *
1'231.64 USD *

SMA feedthrough 18 GHz, 1 Pin, Double ended DN16CF

Product code: EFCFSMADN16CF

SMA Coaxial Feedthrough, 50 Ohm Matched Impedance to 18 GHz, 1 Pin, Grounded Shield, Double-Ended, 1.33" Conflat Flange

List price:

214.74 CHF

219.56 EUR *
236.00 USD *

SHV 5kV 90 Degree Adapter

Product code: ELASHV5AD90

90° Adapter for SHV 5kV Coaxial Cable

List price:

Electrical Feedthroughs from MPF

Product code: ELFEED

MPF Products Inc. has a vast inventory of standard products including D-Subs, Sapphire and Fused Silica Viewports, Multipin Feedthroughs, Coaxial Feedthroughs, Thermocouple Feedthroughs and Breaks.

List price:

636.37 CHF

650.65 EUR *
699.38 USD *

Terminal Block for two K-type Thermocouples, Shapal M™

Product code: ELULTP4TCK

A screw terminal for two K-Type Thermocouples. The isolator is made of Shapal M™ Hi-soft machinable Aluminium-Nitride ceramics. Terminals are made of Chromel/Alumel. A convenient accessory to wire up K-Type thermocouples in UHV.

List price:

535.00 CHF

547.00 EUR *
587.97 USD *

Terminal Block for two K-type Thermocouples, PEEK

Product code: ELULTP4TCK(PEEK)

A screw terminal for two K-Type Thermocouples. The isolator is made of PEEK. Terminals are made of Chromel/Alumel. A convenient accessory to wire up K-Type thermocouples in UHV.

List price:

472.15 EUR *
507.51 USD *

Slotted cheese head screw M1.4x1mm, Molybdenum / pack of 10

Product code: FA18301401PK10

List price:

603.71 CHF

617.25 EUR *
663.48 USD *

Slotted cheese head screw M1.4x1, Tantalum, pack of 10

Product code: FA18401401PK10

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

List price:

546.26 CHF

558.51 EUR *
600.35 USD *

Hex Key for Wobblestick

Product code: HEXKEY-XXXX

Allen key end effector for single shaft wobblestick.
Available in both, metric and imperial sizes. Please specify key type and size.

PBN Heater Assembly for Flag Style Plates

Product code: HSOMPBN50

A pyrolitic boron nitride (PBN) heater in combination with a molybdenum receiver for flag style plates provides a reliable solution for sample annealing. A K-type thermocouple is mounted on the sample receiver.

List price:

on request

FerroLoader Docking Kit for Thermo Fisher Helios DualBeam™ FIB-SEM

Product code: IAKTHFIHELIOSFL

A combined docking system for the UHVCTMand fast entry lockthat fits to the "L-Port" of all Helios^TM, Scios^TM, Aquilos^TMand similar Thermo Fisher instruments. The FerroLoader^TM is additionally compatible with the Ferrovac IGTSFL inert gas shuttle.

List price:

135'300.00 CHF

138'335.07 EUR *
148'696.02 USD *

Glove Box Extension Kit with FerroLoader Docking Station for UHVCTM, Cryo-Loading Station

Product code: IEKGBCR(L)

Ultimate control of the environment in terms of atmosphere and temperature is crucial for cutting edge research in experimental pysics and material science. Important sample preparation tasks such as plunge freezing and mounting of the raw sample onto a sample carrier need to be done inside an inert gas glovebox in order to avoid corrosion or other unwanted alterations of the sample. Once the sample is at cryogenic temperature and mounted to a sample carrier, the speciment needs to be transported to analytical instruments ideally under very good vacuum conditions while maintaining sufficiently low temperature.

The glove box instrument adaption kit shown here allows for installation of all necessary equipment for establishing an ultimately controlled environment sample transport network.

You just can contact you're prefered glove box manufacturer and ask to prepare the side panel for mounting the IAKGBCR Docking Kit for UHVCTM.

List price:

on request

In-Vacuum Brake for Single or Hollow Shaft Sample Transporters

Product code: IVBR-XXXX

In-vacuum brake for RM40, RMHS40,GMD, RMJ and RMJG sample transporters.

List price:

19.72 CHF

20.16 EUR *
21.67 USD *

Miniature cable AWG 36, OD=0.3mm, PFA jacket, black, 1 meter

Product code: IVLPFACU03

UHV compatible miniature cable AWG 36. OD=0.3mm, PFA-Jacket. Conductor material: Silver plated copper, stranding = 7x0.05mm, crossectional area 0.014mm2. Price per 1 meter. Discounts may apply for larger quantities.

Thermocouple Crimp and Push Connector for Pin D=1.4mm, 5/PK

Product code: IVWCPCO14PK5

In vacuum crimp and push connector for electrical feed-throughs with pin diameter 1.4mm
pack of 5

List price:

41.67 CHF

42.60 EUR *
45.80 USD *

Crimp and Push Pin D=1.0mm, 10/PK

Product code: IVWCPP10PK10

In vacuum crimp and push pin for SUB-D feed-throughs, pin-diameter 1.0mm
pack of 10

List price:

on request

13 Pin Spring Probe Connector

Product code: IVWSC13

Miniaturized 13-Pin spring probe connector for use in UHV. Spring probe pins provide a reliable electrical contact.

List price:

21.97 CHF

22.46 EUR *
24.15 USD *

Spring Probe Contact, 0.5mm OD

Product code: IVWSC2

5 kV positive output voltage. Pressure display and built in temperature measurement for Cryo version of VSN40S.

List price:

on request

Control Unit for Vacuum Systems

Product code: LSC1.0

A programmable multi purpose control unit for vacuum systems. Analogue and digital input channels allow for monitoring temperatures and vacuum levels or readout of safety switches. Several 24V power outputs for direct connection of solenoid valves are provided. Values are displayed on the illuminated LCD screen.

List price:

4'250.00 CHF

4'345.34 EUR *
4'670.79 USD *

Controller for NEG activation of NexTorr™ D-100-5 and D-200-5 pumps

Product code: LSN1.0

Power controller for the activation of Non Evaporable Getters. Drives NEG-elements of NexTorr™ D-100-5 and D-200-5 pump models.

List price:

2'055.53 CHF

2'101.64 EUR *
2'259.05 USD *

Linear/Rotary Feedthrough DN16CF

Product code: MD16-XXXX-YYYY

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN16CF.

Product code: MDG40(RL)-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF and rotation lock.
Please select your prefered tube support necessary for rotation lock.

List price:

10'076.33 EUR *
10'831.03 USD *

Boomerax XY Stage DN100 with +-12.5mm travel

Product code: MXY100CF100TCF63TXY12

List price:

19'935.79 CHF

20'382.99 EUR *
21'909.63 USD *

XYZ Boomerax Manipulator XY travel=+-12.5mm, Z travel=200mm

Product code: MXYZCF100TCF63-0012-0200

Basic Boomerax XYZ high precision bellows sealed manipulator configuration with manual, large OD micrometers. Base flange DN100CF (6" OD) tapped, travelling flange DN63CF (4.5" OD).

List price:

on request

XYZ Boomerax Manipulator XY travel=+-12.5mm, Z travel=ZZZZmm

Product code: MXYZCF100TCF63-0012-ZZZZ

Basic Boomerax XYZ high precision bellows sealed manipulator configuration with manual, large OD micrometers. Base flange DN100CF (6" OD) tapped, travelling flange DN63CF (4.5" OD).

19'879.47 CHF

20'325.41 EUR *
21'847.73 USD *

XYZ Boomerax Manipulator XY travel=+-25mm, Z travel=100mm

Product code: MXYZCF100TCF63-0025-0100

Basic Boomerax XYZ high precision bellows sealed manipulator configuration with manual, large OD micrometers. Base flange DN100CF (6" OD) tapped, travelling flange DN63CF (4.5" OD).

List price:

14'416.29 EUR *
15'496.04 USD *

Boomerax Z Stage DN65, 500mm travel

Product code: MZ63CF63CF63-0500

Port Aligner DN63CF

Product code: PA63

Port aligner DN63CF (4.5" OD), L=100 +/-5mm, free bore 65mm.

List price:

2'410.32 CHF

4'548.75 EUR *
4'889.44 USD *

Offset Pincer for JT-SPM V3 - for Dual Shaft Wobblestick

Product code: PGWMSJTAFM3

on request

CAPACITorr® Z100 NEG pump, DN35CF

Product code: PUSAESCAPACITorr®100

CapaciTorr® Z 100 with DN35CF Base Flange

List price:

on request

CAPACITorr® Z1000 NEG pump DN 100CF

Product code: PUSAESCAPACITorr®1000-100

Special discounted price:

1'832.52 CHF

1'873.63 EUR *
2'013.96 USD *

DN63CF Quick Access Door with DN40CF Rotatable

Product code: QAD63CF40R Special Offer

DN63CF quick access door with rotatable DN40CF flange.

List price:

1'757.05 CHF

1'796.46 EUR *
1'931.02 USD *

Rotary Feedthrough DN16CF with high torque magnet (1 Nm)

Product code: RD16HT-0035

Continuous rotation, mounting flange DN16CF, 1Nm high-torque version.

Material: molybdenum

List price:

968.63 CHF

990.36 EUR *
1'064.53 USD *

Three-Point Drawer Style Receivers for Flag Style Plates

Sample Drawer with 13 Electrical Contacts, Material: CuBe2

Product code: RECOMEC13(CB)

List price:

Vacuum-side-all-metal magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft. Recommended for travel ranges >750mm and for heavier loads.

List price:

8'728.95 CHF

5'271.16 CHF

5'389.40 EUR *
5'793.06 USD *

Dual Shaft Single Rotary Sample Transporter

Product code: RMJ40-XXXX-YYYY

Extra sturdy magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Slide bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection. Sapphire hybride bearings are guiding the inner shaft. Recommended for travel ranges >750mm and for heavier loads.

List price:

6'226.27 CHF

6'365.94 EUR *
6'842.73 USD *

Dual Shaft Dual Rotary Sample Transporter DN40CF

Product code: RMJG40-XXXX-YYYY

Magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft. Slide bearings for linear motion, sapphire hybrid bearings for inner shaft. Throughout guarantee for long-lifetime and smooth operation even after numerous bakeout cycles.

List price:

1'900.11 EUR *
2'042.42 USD *

Revolving Sample Carrier for Block Style Holders

Product code: RSCL4BS

For 4x block style sample holders 12x5x19.5mm.

Fits to all MD and GMD sample transporters.

REV 31.03.2014 UM

List price:

on request

Revolving Sample Carrier RM for SHOM sample plates

Product code: RSCRMD2OM

The revolving sample carrier transports and stores two SHOM sample plates. The sample holders are typically placed into the RECOM receptors using a dual shaft WMG40 wobblestick with a PGWMS(OM)pincer grip. The RSCRMD2OM Revolving Sample Carrier RM for SHOM sample plates is compatible with RMD40 and RMDG40 Sample Transporter. REV 18.01.2012 DvG (UM)

List price:

2'725.68 CHF

85.60 CHF

378.95 CHF

387.45 EUR *
416.47 USD *

Factory overhaul of MD16 linear/rotary feedthrough

Product code: SERFMD16

List price:

on request

Flat spring for sample holding on SHOMT

Product code: SHFS

Flat spring (leaf spring) for clamping samples on a SHOMT sample plate. Available in three different sizes, in a variety of materials. Please contact the sales team to find out which materials we currently have available from stock, and which can be made to order.

List price:

Flag style sample plate

Product code: SHOM

Commonly used flag style plates, available in a variety of materials and customized versions.

Product code: SHOM(TI)

Flag style sample holder
Material: Titanium

List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

Commonly used flag style holder SHOM3S with 3 slots for receiver RECOM3S, available in a variety of materials and customized versions.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)

List price:

446.02 CHF

456.03 EUR *
490.18 USD *

Flag style sample plate, 3xM1.4, leaf springs / molybdaenum

Product code: SHOM3T(MO)

Requires RECOMDC sample receiver with two high current electrical contacts.

List price:

1'835.89 CHF

1'877.07 EUR *
2'017.66 USD *

Sample Plate for Direct Current Heating, with Central Opening for Optical Access from the Rear

Product code: SHOMDCRA

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDCRA sample receiver with two high current electrical contacts.

List price:

1'835.89 CHF

1'877.07 EUR *
2'017.66 USD *

Sample Plate for Direct Current Heating, with Central Opening for Optical Access from the Rear and Grounding Contact

Product code: SHOMDCRA(N)

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDCRA sample receiver with two high current electrical contacts.

List price:

2'507.18 CHF

2'563.42 EUR *
2'755.42 USD *

Sample Holder 13 Electrical Contacts CuBe2, Gold plated including temperature sensor

Product code: SHOMEC13(CB-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor. Requires RECOMEC13(LT) sample receptor assembly.

available materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M

List price:

2'507.18 CHF

2'563.42 EUR *
2'755.42 USD *

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.

List price:

1'718.76 CHF

1'757.32 EUR *
1'888.93 USD *

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M

List price:

on request

Discontinued: Sample Holder with Stainless Steel Crucible

Product code: SHOMEVCR(ST)

Evaporators are no longer in our active range of poroducts. Spare parts are stil available. Please contact us in case you have specific requirements regarding EV40 evaporators.

Stainless Steel crucible mounted on a common flag style sample plate. For quick exchange in EVEX40 evaporator.

List price:

on request

Discontinued: Sample Holder with Crucible

Product code: SHOMEVCRW

Evaporators are no longer in our active range of poroducts. Spare parts are stil available. Please contact us in case you have specific requirements regarding EV40 evaporators.

Tungsten crucible mounted on a common flag style sample plate. For quick exchange in EVEX40 evaporator.

List price:

186.97 CHF

191.16 EUR *
205.48 USD *

Flag Style Sample Plate, 5xM1.4 / molybdenum

Product code: SHOMT(MO)

Commonly used flag style sample holder with 5x M1.4 screw holes.

List price:

731.37 CHF

747.78 EUR *
803.78 USD *

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)-0010-0001-0009

For hat shaped single crystals such as the MaTeck K005 with OD=10mm, lip thickness 1mm, sample diameter <9mm

List price:

on request

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)0008-0001-0007

For hat shaped single crystals such as the MaTeck K005 with OD=8mm, lip thickness 1mm, sample diameter <7mm

Product code: TOCOWR13

List price:

673.67 EUR *
724.13 USD *

Deflection Aligner for Wobblesticks DN40CF

Parking-/ Protection Rail for WM DN40CF vertical

Product code: TSWMV-XXXX

External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.

List price:

on request

UHV System design

Product code: UHV-SD

We build customer designed UHV-Systems. Our engineers design in full 3D using CATIA, one of the most advanced CAD-systems. We plan, design and build fully equipped systems including all pumping, control and bakeout acessories

List price:

106'500.00 CHF

108'889.03 EUR *
117'044.54 USD *

Ultra High Vacuum Cryo Transfer Suitcase Package

Product code: UHVCTS

Fully-featured UHVCTS Cryo-UHV-Suitcase Package. This package contains everything required to get started immediately with your cryogenic sample transfer.

Extended length from gate valve flange = ~380mm (varies slightly depending on sample system)

List price:

111'000.00 CHF

113'489.97 EUR *
121'990.09 USD *

Ultra High Vacuum Cryo Transfer Suitcase Package - Long Throw

Product code: UHVCTSL

Fully-featured UHVCTS Cryo-UHV-Suitcase Package in Long-Throw configuration. This package contains everything required to get started immediately with your cryogenic sample transfer.

Extended length from gate valve flange = ~580mm (varies slightly depending on sample system)