Sign in

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Dual Shaft wobblestick manipulators are designed to operate a pincer grip. Slight pressing of the two halfs of the knob against each other, will open the pincer. A variety of pincers are available for almost any type of sampleholder. Dual shaft wobblesticks are fully rotateable and allow for an angular deflection of +/-20 degrees.

Order code customized version:
  • WMG40-XXXX-YYYY
XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm)

Wobblestick accessories

 

REV 25.08.2014 JK


Specifications: Customized Length Dual Shaft Wobblestick DN40CF

linear travel X ≥ 50mm AND ≤ 700mm
retracted length Y ≥ 63mm AND ≤ 205mm; standard 63mm

  • angular deflection +/-20 degrees (see note 1)
  • linear force: 30N
  • torque: 0.4Nm
  • bakeout temperature: 150deg C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

note 1: if mounted to wobblestick flange

download drawing

download manual

Options

The following is a list of compatible options for WMG40 Customized Length Dual Shaft Wobblestick DN40CF.

List price:

1'430.00 CHF

1'230.85 EUR*
1'453.99 USD*

Straight Pincer for SHOM Flag Style Plate

Product code: PGWMS(OM)

Standard clearance, sample play of +/-8°.


List price:

375.00 CHF

322.78 EUR*
381.29 USD*

Adapter for Omicron Pincer Grip SA02-1862 (STM1)

Product code: ADOMO

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.
REV: 23.5.2011 UM


List price:

175.00 CHF

150.63 EUR*
177.94 USD*

Adapter for Omicron PincerGrip GA02-1810/GA02-1119

Product code: ADOMO2

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM


List price:

175.00 CHF

150.63 EUR*
177.94 USD*

Adapter for Omicron Straight Pincer Grip GA02-182

Product code: ADOMS

Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182
REV: 23.5.2011 UM


List price:

250.00 CHF

215.18 EUR*
254.19 USD*

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM


List price:

850.00 CHF

731.62 EUR*
864.26 USD*

Aligner for Wobblesticks DN40CF

Product code: TSWMA

A useful accessory to align and keep the deflection angle of a wobblestick manipulator. Three thumbscrews are used to position the wobblestick axis.

Maximum deflection angle = +-8 degrees.
 


List price:

850.00 CHF

731.62 EUR*
864.26 USD*

Deflection Limiter (3deg) for Wobblesticks DN40CF

Product code: TSWMDL(3)

Deflection Limiter to restrict the angular deflection of wobblesticks to three degrees.


List price:

395.00 CHF

339.99 EUR*
401.63 USD*

Parking-/ Protection Rail for WM DN40CF vertical

Product code: TSWMV

External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
REV. 02.04.2013 DvG


List price:

395.00 CHF

339.99 EUR*
401.63 USD*

Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage

Product code: TSWMF

External support rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use - also in non-horizontal usage.
Please note: only for WM or WMG(FC)
REV. 25.03.2013 DvG


List price:

290.00 CHF

249.61 EUR*
294.87 USD*

Inline Parking-/ Protection Rail for WM DN40CF

Product code: TSWMIL

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM


List price:

345.00 CHF

296.95 EUR*
350.79 USD*

Lock Ring for TSWM DN40CF

Product code: TSWMLR

Lock ring for locking the external support rails TSWM with three or four knurled screws.
REV. 25.03.2013 DvG


List price:

295.00 CHF

253.92 EUR*
299.95 USD*

Bellows Protection for Wobblesticks

Product code: BP40

The BP40 enables angular movement of a wobblestick attached to flanges with tubes that have an inner diameter smaller than 40mm.


List price:

230.00 CHF

197.97 EUR*
233.86 USD*

Zero Length Reducing Flange CF63CF40 for Wobblesticks

Product code: ZLCF63CF40WM

Zero Length Reducing Flange CF63/CF40 with bevelled inner edges. Customized for use with wobblesticks.


List price:

1'896.00 CHF

1'631.95 EUR*
1'927.81 USD*

Straight Pincer Grip for VG-Stub Sample Holders

Product code: PGWMS(VGS)

Pincer Grip for VG-Stub Style Sample Holders.


List price:

1'560.00 CHF

1'342.74 EUR*
1'586.17 USD*

Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OM)

Longer version, standard clarance, sample play of +/-8°


List price:

1'560.00 CHF

1'342.74 EUR*
1'586.17 USD*

Hard Grip Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OMH)

Longer version, reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 


List price:

215.00 CHF

185.06 EUR*
218.61 USD*

Upgrade to 200°C Bakeable Version of Dual Shaft Wobblesticks and Dual L/R Feedthroughs

Product code: UPGRADEHB_MKWMG(FC)

Upgrade from 150°C to 200°C Bakeout Temperature for Dual Shaft Wobblesticks and Dual L/R Feedthroughs.


List price:

2'190.00 CHF

1'885.01 EUR*
2'226.74 USD*

Orthogonal Pincer for SHOM Flag Style Plates

Product code: PGWMO(OM)

Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM


List price:

0.00 CHF

0.00 EUR*
0.00 USD*

Parallel Pincer with Isolated Jaws

Product code: PGWMP(DC)

Electrically isolated jaws for DC-heating, sample bias or current measurement.
REV 12.08.2014 UM


List price:

2'990.00 CHF

2'573.59 EUR*
3'040.16 USD*

Parallel Pincer for SHOM Flag Style Plates

Product code: PGWMP(OM)

"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB


List price:

2'990.00 CHF

2'573.59 EUR*
3'040.16 USD*

Hard Grip Parallel Pincer for SHOM Plates

Product code: PGWMP(OMH)

"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB


List price:

1'280.00 CHF

1'101.74 EUR*
1'301.47 USD*

Alignment +/-12mm and Protection Rail for Wobblestick on VSN40S(V)

Product code: TSWMVSNV

Alignment +/-12mm and Protection Rail for Wobblestick on NexGeneration UHV Suitcase VSN40S(V).


List price:

on request

Customized Straight Pincer

Product code: PGWMS

Base model for application specific machining of the jaws.
REV 2014 UM


List price:

1'430.00 CHF

1'230.85 EUR*
1'453.99 USD*

Hard Grip Straight Pincer for SHOM Flag Style Plates

Product code: PGWMS(OMH)

Reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018