3'513.99 EUR *
4'061.02 USD *
Prices listed are EXW Zurich (Incoterms 2010), excl. packing.
This price list replaces all previously published lists.
Prices are subject to change without notice.
Minimum order value: 150.00 CHF.
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1.144 EUR/CHF
0.9899 USD/CHF
High power magnetically driven single shaft wobblestick with mounting flange DN40CF.
XXXX: linear travel in mm / YYYY: retracted shaft length in mm (min. 42) REV 13.11.2014 JK
Featuring a high torque of 1Nm and a linear force of 60N, the WM40HT is ideally suited as a UHV screwdriver, for locking sample holders, engageing thermal links or closing electrical contacts.
Order code: WM40HT-XXXX-YYYY
Example: WM40HT-0180-0055 = Wobblestick Manipulator, High Torque DN40CF, 180mm linear travel, retracted shaft length 55mm.
linear travel X >= 0mm AND <= 700mm; standard 0mm
retracted length Y >= 42mm AND <= 200mm; standard 60mm
note 1: if mounted to wobblestick flange
The following is a list of compatible options for WM40HT Customized Length High Torque Single Shaft Wobblestick DN40CF.
218.53 EUR*
252.55 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM
279.72 EUR*
323.26 USD*
Upgrade from 150°C to 200°C Bakeout Temperature for Single Shaft Wobblesticks and L/R Feedthroughs High Torque Version.
340.91 EUR*
393.98 USD*
Straight fork for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm
REV 23.5.2011 UM
297.20 EUR*
343.47 USD*
Short fork without shaft for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm. M4 screw for direct installation.
REV 23.5.2011 UM
257.87 EUR*
298.01 USD*
This key can be used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal socket screws.
Available in both, metric and imperial type hex keys. Please specify key type and size upon ordering.
REV 23.5.2011 UM
257.87 EUR*
298.01 USD*
Turns you wobblestick into an allen wrench. Used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal head screws.
Available in both, metric and imperial sizes. Please specify nut type and size upon ordering.
REV 23.5.2011 UM
253.50 EUR*
292.96 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM
257.87 EUR*
298.01 USD*
The BP40 enables angular movement of a wobblestick attached to flanges with tubes that have an inner diameter smaller than 40mm.