Sign in

Ultra SLIM Pincer for flag style plates - for Omicron LT AFM

Product code: PGWMS(OMUSLIMLTA)

The PGWMS(OMUSLIMLTA) has the appropriate groove to fetch flag style sample plates. It is especially designed to grab and release  the AFM tip mounted on the Omicron LT-SPM's Tip carrier. A gap between the jaws allows for squeezing the tip holder, thereby releasing it from it's seat on the carrier. Releasing the jaws again within the seat, the tip holder regains it's firm fit.

The narrow head of the PGWMS(OMUSLIMLTA) offers better visibility of the sample plate and AFM tip holder. The symmetrically opening and particularly slim jaws are predefined for use where little space is available.

For ultimately precise and safe handling, we recommend the PGWMS(OMUSLIMLTA) be used in combination with a fine adjuster coupling equipped dual shaft wobblestick WMG40(FC)-XXXX-YYYY.

Specifications: Ultra SLIM Pincer for flag style plates - for Omicron LT AFM

adds 27.0 to dimension Y of the main product

  • jaw opening: ~23° max.,  -2.3° min.
  • bakeout temperature: 200 °C max.
  • material: stainless steel 1.4301, CuBe2
  • compatible with Omicron style sample holders and LT-AFM tip holder

download drawing (pdf)
download 3D-model (stp)

Options

The following is a list of compatible options for PGWMS(OMUSLIMLTA) Ultra SLIM Pincer for flag style plates - for Omicron LT AFM .

List price:

Flag style sample plate

Product code: SHOM

Commonly used flag style holder SHOM, available in a variety of materials and customized versions.

SHOM(ST) - SHOM(CU) - SHOM(CB) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(AL2O3) - SHOM(SH) - SHOM(W) - SHOM(SiC)


List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

Commonly used flag style holder SHOM3S with 3 slots for receiver RECOM3S, available in a variety of materials and customized versions.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)


List price:

1'526.00 CHF

1'404.51 EUR*
1'655.46 USD*

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M


List price:

2'226.00 CHF

2'048.78 EUR*
2'414.84 USD*

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.


List price:

185.00 CHF

170.27 EUR*
200.69 USD*

Flag Style Sample Plate, 3xM1.4, Leaf Springs

Product code: SHOM3T(ST)

Flag style sample plate, three threads M1.4, incl. cheesehead screws and leaf springs
Material: stainless steel 1.4301 (AISI 304L)


List price:

1'381.00 CHF

1'271.05 EUR*
1'498.16 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

1'398.00 CHF

1'286.70 EUR*
1'516.60 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

100.00 CHF

92.04 EUR*
108.48 USD*

Service Kit for Pincer-grip Jaw Axles

Product code: SERKPG

Replacement press pins for Ferrovac pincer-grip, including new washers. The revised design eliminates the risk of losing the circlips present in previous versions and is backwards compatible with most older pincers.


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2021 | © vogy GmbH 2021