E-Beam Heater for Flag Style Plates
Product code: HSAS40-HSEBOM(P)-HSEFMS12P7(K)-XXXX
-HSEFMS12P7(K)_400.jpg&width=400)
Completely configured E-Beam Sample Heating Stage Assembly for Omicron Sample Plates
Temperature range: RT ~ 2000°C.
(With K-type thermocouple RT ~ 1300°C.)
HSAS40 :: Made to Order
During operation, the thermocouple is connected to potentially hazardous positive high voltage of 1kV. Temperature is measured on the sample receptacle. Air-side connection to temperature measurement instrument in a safe way is fully under the responsibility of the purchaser.
Download Drawing (PDF)
Download manual
HSAS40 :: Made to Order
Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
MS HV type air side connector included K-type thermocouple installed.
Specifications: E-Beam Heater for Flag Style Plates
-HSEFMS12P7(K)_485.jpg&width=400)
length X >= 177mm AND <= 500mm; standard 219mm
- Distance from flange face to center (or surface) of sample plate: customized.
- Temperature range: RT ~ 2000°C (With K-type thermocouple RT ~ 1300°C.)
- Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
- MS HV type air side connector included.
- fully UHV compatible materials
- Controller not included
During operation, the thermocouple is connected to potentially hazardous positive high voltage of 1kV. Temperature is measured on the sample receptacle. Air-side connection to temperature measurement instrument in a safe way is fully under the responsibility of the purchaser.