Sign in

Motorized Linear Drive for MD16 Feedthrough

Product code: DRVMDMOTL16-XXXX

The DRVMDMOTL16 is a stepper motor-driven one axis linear actuator. It's high precision motorized spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a resolution of 0.01mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution. The linear axis is driven by a Nanotec ST2018L0804 2-phase stepper motor.
The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

MD16 linear drives can be equipped with the DRVMDMOTL16 option and configured with either continous rotation of the shaft or as a linear only drive.

Please note that for bakeout the drive must be removed.

 

Specifications: Motorized Linear Drive for MD16 Feedthrough

length X >= 0mm AND <= 526mm; standard 0mm

  • linear drive unit DRVMD: 2mm  pitched spindle drive (1mm on request)
  • linear travel: customized
  • max. travel speed: 25mm/s
  • theoretical linear resolution: 0.01mm (with 2mm pitched spindle)
  • mounting flange DN16CF (2,75" O.D.)
  • linear force: 30N
  • torque: 0.5Nm
  • manipulator bakeout temperature: 200 °C max. (without stepper motor, according to the manual)
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

Download Manual

Download drawing PDF
3D-model available on request

Stepper Motor Linear Drive:

  • Voltage: 3.22
  • Amps/Phase: 1.4
  • Resistance/Phase: 2.3+/-10% Ohms
  • Holding torque: 0.117 Nm
  • Step angle: 1.8°+/-5%

Download Datasheet

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2021 | © vogy GmbH 2021